Notes concerning “3-D printing”

• Precisely measuring out particulates with a trickler 02021-05-09 (updated 02021-12-30) (17 minutes)
• 3-D printing in carbohydrates 02021-05-16 (updated 02021-12-30) (10 minutes)
• Clay-filled PLA filament for firing to ceramic 02021-05-17 (updated 02021-12-30) (1 minute)
• Multicolor filament 02021-05-17 (updated 02021-12-30) (5 minutes)
• Acicular low binder pastes 02021-05-19 (updated 02021-12-30) (1 minute)
• Selectively curing one-component silicone by injecting water 02021-05-19 (updated 02021-12-30) (2 minutes)
• Glass powder-bed 3-D printing 02021-06-29 (updated 02021-12-30) (20 minutes)
• Powder-bed 3-D printing with a sacrificial binder 02021-06-30 (updated 02021-12-30) (12 minutes)
• Electrolytic berlinite 02021-07-12 (updated 02021-12-30) (7 minutes)
• Can you 3-D print Sorel cement by inhibiting setting with X-rays? 02021-07-16 (updated 02021-07-27) (1 minute)
• A construction set using SHS 02021-08-24 (updated 02021-09-11) (5 minutes)
• Selective laser sintering of copper 02021-08-30 (updated 02021-12-30) (6 minutes)
• Negative feedback control to prevent runaway positive feedback in 3-D MIG welding printing 02021-08-30 (updated 02021-12-30) (3 minutes)
• Fast electrolytic mineral accretion (seacrete) for digital fabrication? 02021-09-01 (updated 02021-12-30) (52 minutes)
• The sol-gel transition and selective gelling for 3-D printing 02021-10-03 (updated 02021-12-30) (6 minutes)
• Flexural mounts for self-aligning bushings 02021-10-18 (updated 02021-12-30) (3 minutes)
• 3-D printing in poly(vinyl alcohol) 02021-12-15 (updated 02021-12-30) (2 minutes)